banner



How To Clean Gold Electrostatic Air Filter

Dorsum to Blog

How to Clean an Electrostatic Air Filter

Dirty air filters can cause many problems with your heating and cooling systems, too every bit your indoor air quality. That's why your HVAC contractor is so determined about the importance of using make clean filters and replacing filters on a regular basis. While replacement filters can be costly and seem wasteful, electrostatic air filters are a reusable option. To get the almost out of an electrostatic air filter, y'all'll demand to know how to properly make clean them. Hither'south more on these types of air filters and how to clean them.

Example of an electrostatic air filter

What Is an Electrostatic Air Filter?

An electrostatic air filter is a type of furnace filter. It is washable and reusable, unlike commonly used disposable replacement furnace filters.

Electrostatic air filters are composed of vented metal layers. As air flows through the layers:

  • The metallic material becomes charged with static electricity.
  • The static electricity attracts contaminant particles, property them within the filter until they are washed out.

10 Steps to Cleaning an Electrostatic Air Filter

Clean your electrostatic air filter by following these steps:

  1. Carefully remove the electrostatic air filter from the filter chamber located nigh your organization's air handler.
  2. Using a garden hose with a ability spray nozzle, plow on the h2o to full pressure.
  3. Spray the filter's make clean side, the side that is reverse of the filter's airflow arrows. This backwashes the filter, forcing the contaminants out.
  4. Continue to spray the filter with water until the entire expanse of the filter has been cleaned.
  5. A few times a year, make clean the electrostatic filter with a mild solution, fabricated from h2o and dishwashing soap. Spray this solution over both sides of the filter. Allow it to stand up for a few minutes, then repeat steps 2-4 to rinse the filter.
  6. If necessary, spray the front side of the filter with water for a few additional minutes to remove any tough cloth.
  7. Prop your air filter up then its drain holes are facing down.
  8. Permit water bleed and the filter dry for fifteen to 30 minutes (or as long as needed so that no more than water is dripping off of the filter).
  9. Once the filter is completely dry, reinstall it in the direction indicated by the airflow arrows.
  10. Repeat this cleaning procedure on a monthly basis.

While keeping your electrostatic air filter clean can do a lot to keep your system running optimally, somewhen, every system needs maintenances or repairs.

How to Clean an Electrostatic Air Filter | HVAC Contractors

Schedule Almanac Furnace Maintenance or a Quondam Tune-Upwardly

For easy, worry-free heating maintenance, join our Comfort Guild. You'll enjoy savings while getting the best HVAC service in Smyrna. Benefits of membership include:

  • Conducting thorough visual inspections of the entire HVAC system
  • Inspecting ductwork, indoor blowers, air handlers, frazzle outlets, and evaporator coils
  • Cleaning indoor blowers and outdoor condensers equally needed
  • Checking everything from wet and dry out bulbs to electrical connections, relays, suction pressure, amp draw, and more
  • Checking and adjusting thermostat settings
  • Lubricating all moving parts
  • And more!

If y'all need HVAC service in Smyrna or Rutherford County, TN, don't hesitate to contact the trusted HVAC technicians and installers at Parker'south Heating & Cooling today! Telephone call 615-355-9137 to schedule service.

Source: https://www.parkershvac.com/blog/how-to-clean-electrostatic-air-filter/

Posted by: lheureuxupoing.blogspot.com

0 Response to "How To Clean Gold Electrostatic Air Filter"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel